SUNLOC CLAMP SEAL RING
Application up to 1,700oF
Full vacuum service
Up to 60,000 psi
Versatile design, quick changeovers, saves time and money
PDF Download- Specification
- You may also like
SUNWELL SUNLOC SEAL RING are supplied coated typically with PTFE, MoS2 or Sliver in order to provide lubrication during assembly.
Benefits:
> Assured joint integrity first time - every time;
> The seal forces and seal diameter are minimal, meaning that the load capacity of components is maximised;
> Leak-free connection - gas - tight metal-to-metal seal;
> All seal rings meet NACE hardness limits.
How the SUNLOC Clamp connector works:
The clamp connector consists of 3 types of components, the seal ring, the two hubs and the clamp assembly, normally consisting of two clamp halves and fort bolts.
The clamp fits over the two hubs and forces them against the seal ring rib.
The hubs are drawn together by the clamp assembly, the seal ring lips deflect against the inner sealing surfaces of the hubs.
This deflection elastically loads the lips of the seal ring against the inner sealing surface of the hub, forming a self-energized seal.
More detail and Datasheets & Installation Manu, Kindly contacting with SUNWELL Sales Team.
E-mail: sales@sunwellseals.com
