Aramid Fiber Packing
Aramid fiber packing braided from high quality Dupont aramid
and kevlar fiber with PTFE impregnated and lubricant additive. It is
wear resistant but may damage the shaft is not used properly. A minimum
shaft hardness of 60HRC is therefore recommended.
- You may also like
Araid fiber packing is braided from high quality Dupont aramid fiber with PTFE impregnated and lubricant additive. It shows good chemical resistance, high elasticity and very low cold flow. It can resist severe media and higher pressure. The packing is lubricated with silicone based compound for quick and easy break-in.
SUNWELL P301L aramid fiber packing with insert lubricant Without impregnation, an extremely durable, highly abrasive resistant packing. It is an idea for slurry service application.
>This is a universal packing which can be used for pumps in all types of industry.
>Chemical, petrochemical, pharmaceutical, food and sugar industries, pulp and paper mills, etc.
>A durable packing able to withstand granular and abrasive applications.
>It is wear resistant but may damage the shaft if not used properly.
>A minimum shaft hardness of 60HRC is therefore recommended.
> Lower frictional factor
|Material||Aramid fiber and graphite PTFE|
|Temperature Range||-150 up to +280 oC|